Sheer Sparkles are shiny on both sides. They are translucent with suspended glitters. They all have 2 different colours of glitter in them, the colour they are + silver (i.e Purple has Purple & Silver glitter). Black & Fairy have iridescent glitter & sparkle holographically.

Shards

Our Shards acrylics are shiny on both sides. They all have a back that the glitter sits on, the dark colours have a black backing. We etch on the 'front' translucent element of these as it is more effective against the glitters.

Crystals

Our Crystals acrylics are shiny on both sides. They are all floating in clear acrylic (the Gold has a golden tint). We etch on the 'front' translucent element of these as it is more effective against the glitters. All flake densities are different, even within the sheets themselves.

Chunky Shards

Our Chunky Shards acrylics are shiny on both sides. They all have a back that the glitter sits on. They are all approx 4mm thick. We etch on the 'front' translucent element of these as it is more effective against the glitters. 
WE ARE SOLD OUT OF XMAS SHARD. Apologies, we only had a small amount left for 2023 & the colour is no longer made. 

Marbled Pearls

Marbled Pearls are shiny on both sides. They are a delicious swirl of marble & shine. They have a back side with less detail than the front. 

Please note: On the lighter colours in this range, grey marks may show up where there are corners/inner curves on the items (i.e the corners of stars/petals, lines of wiggle sticks). This is especially present in the Mother of Pearl, Rose Quartz, Seafoam, Honey & Lavender. Simple shapes are best chosen for those colours.

Neon & Fluoros

Neons & Fluoros are shiny on both sides. The Neons are semi-opaque brights that are not as intense in colour as the Fluoros. 

The Fluoros are high brightness translucent hard to capture on camera but very effective in person.

Frosted

Most of the Frosted Range are matte on both sides. The Lilac, Pale Blue & Soft Mint are Matte one side, shiny the other. We engrave on the frosted side of this range as we presume this is the quality you're choosing.

Frosted are a semi-translucent acrylic that defuses the light beautifully. Frosted is a great choice for earring displays & photography as it does not catch reflections vs Translucent acrylics.

The Sheer Frosts are matte frosted on one side & shiny the other. They are a semi-translucent acrylic that defuses the light beautifully. We engrave on the shiny side of this range*.

The Sheer Frosts have a bright edge, this is most effective on simple shapes such as Earring Displays & Sticks, Circles etc . We find the bright edge lessens on more complex shapes i.e Flowers, Stars etc. 

Aqua Note: It is hard to capture on camera however the Aqua has a yellow/green hue to it that makes it almost two-tone.
Green Note: The green has more colour density than the other 5 colours

Translucent

Translucent acrylics are shiny on both sides & are see through. Translucent engrave very effectively (especially with logos on displays).

Glass is clear tinted green, Ice is clear tinted blue. Black & Charcoal are black variants where the charcoal has blue tones and the black has no saturation.

Specialty

Iridescent Translucent: VERY popular for dangley bits! The iridescent is applied as a film on the acrylic, be careful when peeling the tape off to not also peel this off.

Aura, Paua & Mermaid are full of depth, colour & sparkle. Aura & Mermaid are like the pearls - grey marks may show up where there are corners/inner curves on the items (i.e the corners of stars/petals, lines of wiggle sticks). 

Pearl Shimmer is sparkly, milky white with gold mica - Very luxe. Ivory is cream shot with browns. Tortiseshell is a red brown semi-translucent.  

Woods

Walnut, Cherry, Red Gum & Tasmanian Oak: These are 3.5mm thick. These are real woods. Peel off protective tape with the wood grain to minimise the natural fibres lifting. You can sand, paint or stain these woods - they open up a world of creation!

Bamboo: Approx 2.5mm thick. Peel protective tape off with the grain to minimise the natural fibres lifting (more lifting occurs with bamboo in general. You can sand back if you choose).

Varnished: This wood is 3-3.5mm thick and varnished with a Satin Cedar finish. We do not recommend engraving this wood. 

Wood Print: This is Clear Acrylic with a printed image of wood on the back! Matches with your acrylic or high shine components while still looking organic.

General Info & FAQ

• *We engrave the shiny side by default as the protective paper adheres best to it & will give a clean edge if you choose to paint fill.
  
  
• We do our best to colour match our photos but there will be variances from screen to screen. We recommend ordering from desktops where possible as you get a bigger view of the colours & mobile screens tend to oversaturate. 
  
  
• As we use through an acrylic sheet & begin a new one, colour may vary slightly. You may notice slight variances between orders but this is rare.
  
  
• Mirror Acrylic only has protective masking on one side, the other side is the mirror backing (you can't remove it!) 
  
  
• We recommend E6000 when gluing earring backs onto Acrylic Stud Tops.
  
  
• Our Acrylics average 3mm thick. Some can be as thin as 2.5mm & as thick as 4mm. In general they range from 2.7-3.2mm thick.